Adding a new splash of colour to a room is a fantastic way of improving the design. It also happens to be one of the simplest ideas out there. It won’t cost a fortune, it doesn’t take long, and you can do it all yourself.

If you’re thinking about painting a room and switching up the colour scheme, then here are some pro tips to make the whole experience go smoothly:

Choose quality paint

Firstly, arm yourself with good-quality paint. This ensures that your paint actually sticks to the walls and doesn’t peel off after a few weeks. Look for top brands like Dulux, then choose whatever colours are to your taste. There are lots of Dulux paint deals out there, so you can still get amazing quality paint products without paying loads for them. So, there’s your first step: be sure to have some long-lasting and top-tier paint.

Make sure the colours match

The worst mistake you can make is to paint your entire room only to realise the colours don’t go with one another. As such, spend time making sure that you pick a colour scheme that actually works. To make your life easier, We’ve already published a post on successful colour combos for the home. Check it out, and buy your paint accordingly.

Clean the walls

Before you apply any paint, you need to clean the walls. This ensures that you have a fresh surface for the paint to stick to. If it’s dirty or dusty, then the paint simply won’t adhere to the surface very well at all.

Strain the paint

Even if you have a brand new bucket of paint, it could have a few gloopy bits in it. These are basically little balls where the paint has congealed slightly. To avoid getting these on your walls and messing up the finish, simply put your paint through a strainer. This is basically like a sieve, but for paint! Anything that’s not liquid will be caught in the strainer, leaving you with lovely smooth paint to apply to your walls.

It’s also worth adding that you should cover your paint while you are painting. This will prevent one of the biggest painting problems of a skin forming on the top surface. If this does happen, you’ll have to strain your paint again.

Use a brush on the outside edges

Get a brush and use it to start painting around the edges of your wall. It’s a good idea to put some tape down on the adjacent walls to prevent paint from going over an edge onto that wall. The purpose of a brush is to make it easier to get the paint roller out. When you have a few inches of paint around the edges, you can then use a roller without worrying about going over the lines onto the other walls.

Following all of this, you can use a roller and go up and down the wall to cover it really quickly. Then, you’ll have a freshly painted wall that needs to dry. Once dry, you can move any furniture back into place and bask in the new colour scheme.

[disclosure*]