TLC or RIP: Can you save your flooring?

TLC or RIP: Can you save your flooring?

Wood flooring is a popular choice among homeowners for its beauty, warmth and durability. However, it’s susceptible to scratches, dents, stains and water damage over time. So, when it starts showing signs of distress, is it time to bid it a fond RIP, or can some TLC save the day? Let’s examine the options.

Identifying the damage

Before making a decision, it’s essential to understand the nature of the damage your flooring has sustained:

  • Scratches and dents: Heavy furniture, pet claws and high heels can leave their mark on your floors.
  • Water damage: This can cause warping or cupping and is usually the result of spills or leaks.
  • Sun discolouration: Long-term exposure to sunlight can cause fading or discolouration.
  • General wear & tear: This includes worn areas from foot traffic, especially in high-traffic zones like hallways and entrances.

Can you save it?

With some TLC, you can often restore your floors to their former glory:

  • Solid wood floors: Scratches and dents can often be sanded out, and the area can be stained and refinished to match the rest of the floor. With proper care, solid wood floors can last for decades.
  • Engineered wood floors: Light scratches can often be buffed out of engineered flooring with a repair kit, but deep scratches or dents might require replacement of the damaged plank.
  • Laminate floors: Small chips can be filled in with a repair kit, but more extensive damage will require plank replacement.
  • LVT (luxury vinyl tile) floors: LVT is resilient and waterproof, but if it does get damaged, individual tiles can be replaced relatively easily.

When to say RIP

In some situations, the damage may be too severe or widespread for repairs to be a practical solution:

  • Solid wood floors: If the wood has been sanded down to its tongue and groove or if there’s extensive water damage causing warping or cupping, it’s probably time for a replacement.
  • Engineered wood floors: If the top layer of wood has been sanded down multiple times and is too thin for another round, or if large areas are warped or buckled from water damage, a new floor might be in order.
  • Laminate floors: If there’s extensive water damage or discolouration, or if large sections are worn down, you’ll need to replace the floor. Remember, laminate floors cannot be sanded and refinished.
  • LVT (luxury vinyl tile) floors: If there are wide areas of damage or the pattern has become outdated, replacement is a good option. LVT floors are a really good option because they’re easy to maintain and have a really similar appearance to solid wood flooring without having a similar price tag.

Deciding whether to save or replace your wood flooring can be a challenging decision. It requires understanding the type and extent of the damage, knowledge of the repair process, and a cost-benefit analysis. In many cases, a little TLC can rejuvenate worn flooring; however, in others, it’s best to say RIP and start fresh with new flooring. No matter what you choose, investing in your floors enhances your home’s appeal and functionality.

disclosure*

Laminate flooring: A good idea for your home

Laminate flooring: A good idea for your home

Perhaps you’ve recently bought a doer-upper and you’re about to embark upon some major renovation work. You’re excitedly contemplating colour schemes, creating mood boards and researching interior decorating retailers. Maybe you’re beginning to contemplate what the best floor coverings are to use in each room. In this post, we’ll be going through many of the reasons why laminate flooring is a good idea for your home.

Practical

Laminate flooring is quick and simple to install; it’s supplied in packs of precut lengths that click together effortlessly. There’s no need to use nails, screws or glue. Lay it over a thin foam underlay then trim with beading along the edges to create a neat finish. You should be able to start and complete laying a laminate floor in an average-sized room in less than a day.

Also, this type of flooring is very easy to keep clean and maintain, merely use a damp mop once a week or so and sweep with a soft brush or vacuum cleaner as and when needed to keep it looking in tip-top condition.

Hard-wearing

High traffic areas within the home such as the inner porch, hallway and corridors can see a lot of footfall on a daily basis. Soft flooring options such as carpets, rugs and runners in these spaces will quickly become worn and stained and soon begin to look scruffy and unattractive. Not so with laminate – just a quick mop and a speedy sweep after a procession of muddy boots have been through and the floor will look as good as new again!

So much choice

Laminate flooring finishes can imitate a range of other types of materials; hardwood, stone, slate, ceramic tile etc. In addition to this, laminate is available in many different colours and patterns – so there’s bound to be at least one product that will suit your taste and décor.

Many modern examples are water resistant and therefore suitable for use in bathrooms, utility rooms and other spaces that may experience a fair amount of dampness. Some types may even be laid over underfloor heating.

Furthermore, as well as laying laminate planks in the traditional parallel line formation, there are some models that are designed to be laid down in a herringbone or chevron pattern. This will allow you to create a parquet style floor – but much more quickly and cheaply.

Affordable

Laminate is one of the most affordable flooring materials out there. If you like the idea of hardwood floorboards but don’t have the big budget required to buy and install it, a good alternative is laminate printed to give the impression of a much more expensive oak or teak timber floor.

We hope that the points we’ve made above will help to persuade you that laminate flooring is a suitable and viable option for use in many of the rooms in your home.

[disclosure*]

A beginner’s guide to laying a laminate floor

A beginner's guide to laying a laminate floor

There are some building jobs around the house that, without the proper skill, knowledge or equipment really shouldn’t be embarked upon; major electric jobs and servicing a boiler are two such tasks.

Putting down laminate flooring can be a DIY job, even if you’re not the most experienced or confident individual. The tips in our beginner’s guide to laying a laminate floor will help you get the job done quickly, easily and with the minimum of stress and a top quality finish.

Kitchen with a laminate floor

Choose

In which room will you be laying the laminate floor? It’s suitable for almost any room except for a bathroom as it isn’t a completely waterproof option. If you’re after quality, opt for engineered wood flooring which is durable and hard-wearing as it’s manufactured using a top layer of real wood. This makes it the perfect material for heavy traffic areas such as porches and hallways. Laminate is a hygienic option as it’s easy to clean; a quick sweep or vacuum and then a going over with a damp mop. Therefore, it’s a good choice for the kitchen, laundry or children’s nursery.

Laminate flooring is available in click lok or tongue & groove boards which simplifies the fitting process. It’s available in a huge array of wood finishes with attractive natural knots and graining. Depending on your décor, you could choose rustic oak, sleek American black walnut or natural maple.

Person doing woodwork

Measure

As the old adage goes, ‘Measure twice, cut once’. You don’t want to waste time, money and materials by cutting the boards too short or at the wrong angle. Saying that, it’s always best to order a little more than you think you actually need in case things go a bit wrong.

Click lok planks of laminate flooring

Cut

Once your chosen flooring has been delivered, give it at least 24 hours indoors to allow it to acclimatise (preferably inside the room in which it’s to be laid) before you begin cutting it. The wood will expand or contract and adjust to the temperature and humidity of your home.

Ensure you have the necessary tools to hand before you begin the job. A workmate bench will make the task a lot easier – especially if you’re working on your own. You’ll need a hand hacksaw or electric jigsaw to cut the boards quickly, cleanly and precisely. Also, a hammer and small block of wood to gently tap and close any gaps between the boards as they’re being laid. You’ll need a few spacers to put between the wall and planks. This ensures a uniform gap around the edges which allows the floor a little give to expand in hot or humid conditions.

Also, although not absolutely necessary, some people like to glue the edges of laminate flooring to prevent movement. Finally, a mitre box would be useful for making angled cuts for boards that will be positioned in the corners.

Joins in laminate floor planks

Lay

Before you begin laying, ensure you’ve swept or vacuumed the base that the laminate will be laid upon and that it’s completely dry.

If the base is made of levelled concrete or ceramic tile, ensure you put a layer of plastic sheeting between it and the laminate to act as a waterproof membrane. If the base consists of wooden floorboards, make sure the boards are nailed in securely and lay underlay on top of it before the laminate goes down. Laminate is also suitable for laying over underfloor heating and even carpet, so long as the surface is even.

It’s favourable to lay the laminate boards so that the long sides are parallel to the lengthiest wall in the room. Also, stagger the position of boards to ensure their edges don’t all line up uniformly. This is for strength as well as attractiveness.

Laminate flooring in a hallway entrance

Finish

For a professional, high-quality finish along the edges of walls and over door thresholds, it’s recommended that you lay skirting boards, beading, trims and/or cover strips.

Once the flooring job is complete, we recommend that you refrain from walking on it for 24 hours as it may affect the evenness of the surface.

[disclosure*]

Flooring choices – room by room

Thin wooden floor boards in living area

There are many things to consider when choosing flooring for your home. The type of room and its use is the first and most obvious factor. What look or atmosphere are you trying to create? How durable does it need to be? What’s your budget? These are important initial questions. But perhaps you’re also concerned about using natural and or sustainable/environmentally friendly products. Perhaps someone in your household suffers from allergies, some floor coverings are more suitable than others. There are lots of products available on the market to fit all criteria.

Dining area with parquet floor and cow hide rug

Sitting room / dining room / lounge

In houses nowadays, the sitting room, dining room and lounge areas are often designed to be open plan. This means that the flooring is often the same throughout, giving a seamless flow to the space. These areas form the main living spaces of the house so flooring should have a sense of warmth.

Soft surfaces such as carpet spring to mind. It provides the desired comfort and warmth – and is available in an endless array of colours and pattern to suit any decorating scheme. There’s also the option of seagrass, coir, sisal, jute and water hyacinth for a natural look and feel.

Laminate flooring

For this there is a perfect laminated solution that’s been available for decades. There is choice of laminate flooring for all rooms with an increasing range of designs available than any other floor. This material has been continually developing and now offers great flexibility in terms of colour, finishes and price range. It’s very durable too, so great for families or pet owners. With its click groove design, it’s relatively easy to install – whether by a professional fitter or DIY enthusiast.

You might also be lucky enough to find some parquet or lovely old floorboards under a battered, dated carpet. New wood or reclaimed boards could also be installed. These can be buffed, sanded, stained or painted.

Or how about coconut timber? Coconut palm wood is made from matured (60-80 years old) coconut trees that no longer bear fruit – looks great and environmentally friendly too!

Bamboo is another flooring material gaining in popularity. As it’s a quick-growing grass, not a true wood, it is sustainable product.

To soften these harder surfaces or define spaces, lay rugs to break up the expanse of laminate or wood. For safety reasons, ensure that they wont move or slide with non-slip backings, clips or tacks.

Hallway laid with encaustic tile floorcredit

Porch / hallway

The part of the house that receives the heaviest traffic in most houses. The flooring material must be durable and easy to clean. Again, you could consider laminate or wood products. Or perhaps stone or ceramic in this area. A patterned surface such as encaustic tile is ideal as dirt doesn’t stand out as easily as it would on a plain floor. It’s also often the first room you enter, so making a statement is no bad thing!

Natural stone kitchen floor

Kitchen

The kitchen isn’t called the heart of the home for nothing. In many homes, it’s a gathering space – the place where we meet, chat, cook and eat.

Durability and hygiene are key. There are food spills, dirty foot and paw prints to contend with – so cleaning it needs to be a straightforward operation. Again we’d highlight laminate and wood as possible choices.

Natural stones such as limestone, slate or marble are good options for this area too. Also ceramic tiles and composite stone such as terrazzo. If you’re going for naturally cold materials such as stone or ceramic, consider the benefits of underfloor heating being installed at an early stage of the design process.

Vinyl tiles are a very affordable option. They are easy to lay, easy to keep clean, waterproof and are very hard wearing. The range of prints available do a good job of imitating other products such as ceramic tile, stone and wooden floorboards – at a fraction of the cost.

Linoleum has seen a resurgence in recent years. It’s manufactured from flax seeds combined with other natural plant materials. It is an anti-static and hypo-allergenic compound making it a good flooring choice in homes where people have health issues such as asthma or allergies. It’s available in a range of colours which don’t fade and is fire-resistant which is a great safety advantage for kitchen spaces where blazes can start.

Perhaps you like an industrial feel kitchen. You could use reclaimed materials – or introduce materials more normally associated with factory or workplace environments like polished cast concrete, steel or rubber.

Bathroom floor laid with bright yellow rubber flooring

credit

Bathroom / cloakroom

The first and most important consideration – is it waterproof? Who wants soggy, rotting carpets?!!

Fortunately, there are some excellent waterproof options available. We can sing the praises of laminate flooring here again. It also has the feel of cleanliness that many people like in this area – and even though the material is in itself man-made, the various natural colourways lend themselves to natural decorating schemes that are popular in this room.

You could also opt for painted floorboards in this area which in addition to being waterproof, also allows the introduction of any colour of the rainbow.

Rubber and vinyl are also great choices which can be laid as tiles or sheets. They’re both waterproof and warm underfoot. No shortage of colour or pattern choices here either. Styrene-butadiene (synthetic) rubber is resistant to fading and burning. Just the thing if you’re prone to knocking over your relaxing bath-side candles!

Or how about cork? Natural, fire repellent, noise deadening, non-allergenic, waterproof, warm and soft. It’s eco-friendly too as the material is renewable – harvested every few years from the trunk without actually harming the tree.

Carpeted bedroomcredit

Bedroom

The obvious choice for bedrooms is carpet. It’s soft and warm underfoot – perfect as you relax at night or take those first footsteps of the day!

As with the lounge carpets, you’ve also got all the similar flooring products made from natural materials such as seagrass listed previously.

You could add a touch of opulence to your bedroom by laying leather tiles. Leather is luxurious and warm underfoot – and looks fabulous. However it can be quite expensive – and best for small areas of light traffic.

Carpeted stairway

Stairs / landing / corridors

These are other areas of a house that get quite a lot of footfall. The action of going up and down a flight of stairs can be loud especially if the treads are bare wood or concrete. If you live in a flat with other flats above or if you live in a multi-storey house you can often hear people moving about above your head. It could range from softly creaking floorboards to kids sprinting up and down. Laying carpet greatly reduces the noise and can introduce attractive pattern and colour to an often overlooked area.

These connecting spaces might also allow the introduction of toughened glass panels which allows natural light to pass through into other rooms above or below.

Garden with patio area laid with concrete tiles

Outdoors – Garage, patio, balcony, deck

Obviously, this flooring has to be weather resistant. If your garden gets quite a lot of shade, you need a surface that discourages the growth of moss and mould – or one that it can be cleaned off easily.

Wooden decking is a popular choice for many – maintenance requirements will depend on the type of wood. There are also some ‘wood look’ composites and plastics available. These have the benefit of not requiring further attention once fitted and generally have very long lifespans.

Stone tiles are also an option. These natural material really suits the garden environment. You also have the option of carrying the same flooring out into the garden from the kitchen, lounge or conservatory areas. This gives a wonderful flow and helps bring the outdoors inside.

[disclosure*]